Description
Pulse suppressors or launch cables are used during OTDR testing. They allow the OTDR light pulse to settle down before it reaches the first connector of the cable under test so that the loss from that first connector can be measured and included in the test results.
Using two pulse suppressors, sometimes referred to as a launch and receive cable, allows a more accurate measurement of the cable link under test. It allows the pulse to settle down prior to the first connector on the cable link to let the technician determine its insertion loss and back reflection (ORL).
A receive cable placed on the far connector at the end of the cable is used to determine its insertion loss and back reflection.
Key Features
1500 meters of SM G654C fiber
Connector: MPO/APC (input) to LC/UPC (output)
Field-ready and reusable for repeated testing
Applications
OTDR Testing and Certification
Fiber Link Characterization
Installation and Maintenance
FTTx, Data Center, Long-Haul Telecom
Specifications
|
Parameter |
Details |
|
Fiber Type |
Single mode,12 fibers |
|
Fiber Length |
100-1500 meters |
|
Connector Type |
12f MPO/APC - 12* simplex LC/UPC |
|
Breakout Length |
2meters at MPO side, 5m at LC side |
|
Breakout Tubing Diameter |
3.0mm at MPO ,2.0mm at LC side |
|
Drum and Cover Material |
High-impact ABS plastic |
|
Drum Dimensions |
OD: 260mm Height:175mm |
|
Gross Weight |
3.8kgs/1500m reel |
|
Operating Temperature |
-20°C to +70°C |
|
Insertion Loss |
MPO < 0.35dB LC<0.20dB |
|
Return Loss |
MPO> 60 dB LC/UPC> 50 dB |
MPO LAUNCH CABLE 12F SM 1500M
